NVA and the remote volume control convenience
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: NVA and the remote volume control convenience
It gets expensive for long length, I think cost is the limitation. I know of one person using 5m.
-
- Posts: 51
- Joined: Wed Feb 24, 2016 11:06 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA and the remote volume control convenience
OK thanks. I just read somewhere that running long interconnects from a Passive Pre is not a good idea.
System: AURALiC Mini - SPS DAC 3 - NVA P50sa / Croft 7 - Role Audio Enterprise
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: NVA and the remote volume control convenience
Only low cap leads like NVA ones can be used in long lengths. Others will roll the treble off.
-
- Posts: 51
- Joined: Wed Feb 24, 2016 11:06 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA and the remote volume control convenience
My streamer of choice - the Auralic Mini - will be where I digitally attenuate the volume - I am just debating on adding a linear power supply to further improve the Mini.terrybooth wrote: ↑Mon Apr 01, 2019 1:33 pm Like others here, I use a digital front end (Raspberry Pi or Chromecast) but always through a NVA preamp. I can attenuate either at the pre-amp or in the software driving the DAC (although I have disabled this on the Raspberry PI/Volumio mix)
Just wondering - you use the Raspberry Pi and can attenuate in the software driving the DAC - are you connected to a fixed non-variable external DAC but can still attenuate the digits by the software ahead of the DAC? I didn't think that was possible.
System: AURALiC Mini - SPS DAC 3 - NVA P50sa / Croft 7 - Role Audio Enterprise
- Fretless
- Posts: 9365
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1525 times
- Been thanked: 2339 times
Re: NVA and the remote volume control convenience
In Volumio OS for Pi, there is an option to adjust output volume via the software user interface.
Sonos units do this as well.
Sonos units do this as well.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 + LS6+ Sabaj A10a (2) + Little Bear MC2
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 (phono)Aiyima A07 MAX (2) + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times
Re: NVA and the remote volume control convenience
I use the DAC board on the Pi - not a digital output - the outputs from that go into one of the inputs (not the direct input) on the P90SA.wackyraces wrote: ↑Tue Apr 02, 2019 7:52 am Just wondering - you use the Raspberry Pi and can attenuate in the software driving the DAC - are you connected to a fixed non-variable external DAC but can still attenuate the digits by the software ahead of the DAC? I didn't think that was possible.
Similarly the Chromecast analogue outputs go into pre-amp inputs.
So I am attenuating either in software or in the preamp.
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
-
- Posts: 51
- Joined: Wed Feb 24, 2016 11:06 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA and the remote volume control convenience
OK so let’s be clear - if I put a fixed volume DAC (one that cannot be attenuated for example the docs £5 Chinese DAC) - on the end of either a Sonos or Volumino the transport’s software can control the volume ahead of the DAC?
System: AURALiC Mini - SPS DAC 3 - NVA P50sa / Croft 7 - Role Audio Enterprise
- Fretless
- Posts: 9365
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1525 times
- Been thanked: 2339 times
Re: NVA and the remote volume control convenience
Yes. Just checked on Volumio through a fixed-output DAC.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 + LS6+ Sabaj A10a (2) + Little Bear MC2
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 (phono)Aiyima A07 MAX (2) + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
-
- Posts: 1747
- Joined: Tue Apr 02, 2019 4:43 pm
- Location: London-ish, or thereabouts
- Has thanked: 635 times
- Been thanked: 2182 times
Re: NVA and the remote volume control convenience
I stream FLAC CD rips, and Apple Music from my iPhone into an Apple TV 3, then via digital out into a Toppings D30 DAC and into my NVA setup. I set the volume on my Pre amp to the upper limit of comfortable volume, then can control overall volume using iPhone volume buttons.
Works a treat. Sounds great too. That DAC was cheap, but sounds fantastic. Better than the DAC in my SACD Player.
Marlin
Works a treat. Sounds great too. That DAC was cheap, but sounds fantastic. Better than the DAC in my SACD Player.
Marlin
Modded Belles A150 MK2, P90SA, & NVA SSP cables, and LS5.
Leak Stereo 20 & First Audio Classic Copper V2
Modded Lenco GL75 with Saturn arm, heavy custom plinth. Nagaoka MP500.
Nottingham Audio Hyperspace + heavy kit, + Origin Live Conqueror + Koetsu Black
Tom Evans Micro Grove MK2 MC phono
Bluesound Node2i (x2) both with latest power upgrades.
Topping D90MQA and Topping D90SE
Audiolab 6000 CDT transport.
All NVA cables
Leak Stereo 20 & First Audio Classic Copper V2
Modded Lenco GL75 with Saturn arm, heavy custom plinth. Nagaoka MP500.
Nottingham Audio Hyperspace + heavy kit, + Origin Live Conqueror + Koetsu Black
Tom Evans Micro Grove MK2 MC phono
Bluesound Node2i (x2) both with latest power upgrades.
Topping D90MQA and Topping D90SE
Audiolab 6000 CDT transport.
All NVA cables
- Fretless
- Posts: 9365
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1525 times
- Been thanked: 2339 times
Re: NVA and the remote volume control convenience
The Topping DAC seems to be quite a good budget unit. I might get one to play with sometime.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 + LS6+ Sabaj A10a (2) + Little Bear MC2
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 (phono)Aiyima A07 MAX (2) + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450