Good morning all
Having drastically downsized my system, I am excitedly expecting my new INT400sa and Phono 2 next week!
I've also sold my SME V and replaced it with an Audiomods Series 6. This has freed up some funds and given me itchy feet thinking about a suitable replacement for my much loved Benz Gullwing SLR.
I do like the Benz very much, but I'm intrigued by the low output moving iron cartridges and the Soundsmith Zephyr MIMC in particular.
Anyone have any experience with these? Or possibly the Grado Statement 2 ?
Cheers.
Soundsmith Zephyr MIMC
- zebbo
- Posts: 1746
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 29 times
Soundsmith Zephyr MIMC
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!)
-
- Posts: 767
- Joined: Sat Jul 01, 2017 12:51 pm
- Location: South yorkshire
- Has thanked: 1 time
- Been thanked: 365 times
- Contact:
Re: Soundsmith Zephyr MIMC
I tried the bottom of the range soundsmith, the othello a while back, i loved the cart but the actual stylus on that one was a bit crap and i could not get it to track how i wanted it to. That one was i think a bonded elliptical.
With a stylus that is not like the end of a knitting needle and a cantilever not like a scaffolding pole i think the better ones in the range would be very good. The thing sounded alive despite the rubbish tracking.
With a stylus that is not like the end of a knitting needle and a cantilever not like a scaffolding pole i think the better ones in the range would be very good. The thing sounded alive despite the rubbish tracking.
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 562 times
- Been thanked: 301 times
- Contact:
Re: Soundsmith Zephyr MIMC
If the Grado statement is the wood series then I’ve had a couple- mm
One standard and one from expert Stylus with ruby canti and some fancy diamond- neither stood out for me at the time of owning them- had better memories with mp200 or an Ortofon mc
One standard and one from expert Stylus with ruby canti and some fancy diamond- neither stood out for me at the time of owning them- had better memories with mp200 or an Ortofon mc
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- Fretless
- Posts: 9348
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1521 times
- Been thanked: 2321 times
Re: Soundsmith Zephyr MIMC
I have a low output moving iron Grado Signature MCX from the 80's (MCZ stylus) which is a fantastic sounding unit.
Modern designs have refined and improved on this but, for me, Grado's are the best!
Modern designs have refined and improved on this but, for me, Grado's are the best!
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- zebbo
- Posts: 1746
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 29 times
Re: Soundsmith Zephyr MIMC
Thanks for the replies. Well, I've ordered one so we'll soon find out eh!
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!)