NVA p80 pre with phono stage.
-
- Posts: 17
- Joined: Mon Jan 10, 2022 10:40 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA p80 pre with phono stage.
Hi Mark,
The P50 was the same with phono.
Yes, it makes a big difference. I used 4 x 300 va
The P50 was the same with phono.
Yes, it makes a big difference. I used 4 x 300 va
Last edited by quickie2 on Tue Jan 11, 2022 9:03 am, edited 1 time in total.
My noise making stuff :
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
Re: NVA p80 pre with phono stage.
Yes. Before the separate phono stages were released, they were built into the P50/80. When they were, you could buy line only versions like the above.
My noise making stuff :
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
-
- Posts: 17
- Joined: Mon Jan 10, 2022 10:40 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA p80 pre with phono stage.
Thanks quickie2.
So if that's correct and possible. How do I get this done. Would it mean four separate PSU boxes or one with 4 outputs.
Many thanks
So if that's correct and possible. How do I get this done. Would it mean four separate PSU boxes or one with 4 outputs.
Many thanks
Re: NVA p80 pre with phono stage.
You could do either, though Richard used 4 separate supplies.
Maybe NVA would do the work for you, but not difficult to DIY if not.
Maybe NVA would do the work for you, but not difficult to DIY if not.
My noise making stuff :
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
-
- Posts: 17
- Joined: Mon Jan 10, 2022 10:40 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA p80 pre with phono stage.
Not sure I could DIY it if I had step by step instructions I may be able to. But depends on cost of parts. But I would like to have it done just to see what it's like.
- savvypaul
- Posts: 8723
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3024 times
- Contact:
-
- Posts: 17
- Joined: Mon Jan 10, 2022 10:40 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA p80 pre with phono stage.
The LM317/337 voltage regulators are already on the phono board, so you would basically need to buy 4 x transformers (or something custom wound) 4 x bridge rectifiers, and 8 capacitors + case/sjustshoemark wrote: ↑Tue Jan 11, 2022 9:59 am Not sure I could DIY it if I had step by step instructions I may be able to. But depends on cost of parts. But I would like to have it done just to see what it's like.
My noise making stuff :
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
Modified Arcam Alpha 5 CD Player
Inca Designs ID1P Pre
Prototype EWA A40 Power
Q Acoustics 2010i/Royd Minstrel speakers
-
- Posts: 17
- Joined: Mon Jan 10, 2022 10:40 pm
- Has thanked: 0
- Been thanked: 0
Re: NVA p80 pre with phono stage.
So not to much then really it just putting it all together.
I'd definitely love to do it.
I'd definitely love to do it.