Hi,
I've just added a P50sa to complete my NVA setup: BMU, Phono 2 dual power supply, MKII a80 Monoblocks
I got the P50sa off an aquaintance (for free) but he seems to have changed the load resistors on the stepped attenuator to : 10R 0.4W Charcroft Z-Foil Resistor
Is that the right value?!
With vinyl I can't even use the first 'step' it's already too loud.
Any advice would be great, as i'd feel comfortable enough with a soldering iron to change it back to the right value if neccesary.
Cheers
Mark
NVA PRE load resister value
-
- Posts: 21
- Joined: Tue Sep 05, 2017 6:00 pm
- Has thanked: 1 time
- Been thanked: 2 times
- savvypaul
- Posts: 8712
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3018 times
- Contact:
-
- Posts: 21
- Joined: Tue Sep 05, 2017 6:00 pm
- Has thanked: 1 time
- Been thanked: 2 times
Re: NVA PRE load resister value
Wow.
That explains that...
Thanks for replying so promply Paul.
I'll get the right ones ordered straight away!
That explains that...
Thanks for replying so promply Paul.
I'll get the right ones ordered straight away!