Anyone in diy land got a version of these- looks like a simple enough concept - soo expensive
https://rover.ebay.com/rover/0/0/0?mpre ... 3334314899
Boing
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Boing
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- savvypaul
- Posts: 8723
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3024 times
- Contact:
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: Boing
I do remember now- thanks
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- karatestu
- Posts: 5983
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1881 times
- Been thanked: 1418 times
Re: Boing
I don't have any. Got lots of springs though some monstrously large
I think the general idea is to get the resonant frequency down to single figures e.g 3 Hertz - need to know the mass of the suspended object to work out which springs to use. You could try bicycle inner tubes and play around with the inflation pressure to achieve similar results.
If only wheels had been square or rectangular - it would make them easier to use under our gear
I think the general idea is to get the resonant frequency down to single figures e.g 3 Hertz - need to know the mass of the suspended object to work out which springs to use. You could try bicycle inner tubes and play around with the inflation pressure to achieve similar results.
If only wheels had been square or rectangular - it would make them easier to use under our gear
DIY FREE ZONE
- Fretless
- Posts: 9341
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1520 times
- Been thanked: 2314 times
Re: Boing
Squash balls ?
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: Boing
I could never cut them equally
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- savvypaul
- Posts: 8723
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3024 times
- Contact:
Re: Boing
Try an inner tube, then remove and try solid cones - neither need be permanent but it gives you an idea of whether you need to couple (cones) or de-couple (inner tube).
My experience with Rega t/t is that it needs a relatively light but rigid support. The Quadraspire stands fit the bill (cheap enough s/h) if you don't fancy the idea of the Rega wall shelf (marginally better ime).
My experience with Rega t/t is that it needs a relatively light but rigid support. The Quadraspire stands fit the bill (cheap enough s/h) if you don't fancy the idea of the Rega wall shelf (marginally better ime).