I think I probably know the answer to this but I will ask anyway . I have just purchased one of the B standard 20 passive pre amps off the new site which will be getting sent to me w/c 09/09 .
This is to match up with an NVA 20 power amp and I am sure it will be a great match . However a friend of mine has just passed on to me an Acoustic Dimension 41 stepped attenuator which I know is excellent and given that the improvement for the NVA passives is a stepped attenuator is it possible to open the 20 Pre and replace the volume pot ?
I know one the power amps the case is sealed and glued so very difficult to open as there is nothing to service and any issues would be a return to NVA for repair. I have never seen one of the Pre's so are they the same ?
Would love to add the Acoustic Dimension as it is a really excellent and transparent attenuator and would be loley to include it in the nice outer package of the NVA Pre that matches up with the power amp . However if it is just not possible then please let me know and I will consider just getting a case and making up a single input single output box for the Acoustic Dimension which is all I really need.
http://www.acoustic-dimension.com/index.htm
NVA 20 Pre - Can you alter it ?
- George Hincapie
- Posts: 321
- Joined: Wed Aug 21, 2019 7:46 pm
- Location: Buckinghamshire, England
- Has thanked: 252 times
- Been thanked: 176 times
Re: NVA 20 Pre - Can you alter it ?
Opening the case isn't an issue at all, Doc used to do it all the time.
Fitting a SA is something I recall being asked before and Doc's response was that the case for the entry level devices was too small to house one. I'm sure you'll get the official answer from Savvy later though.
Fitting a SA is something I recall being asked before and Doc's response was that the case for the entry level devices was too small to house one. I'm sure you'll get the official answer from Savvy later though.
Headphone Amplification
Linear Tube Audio MZ3
Headphones
HifiMan Sundara • HiFiMan Arya Stealth Edition • ZMF Vérité Closed Ltd (Stabilised) • ZMF Atrium Open Ltd (Hawaiian Koa) • ZMF Aeolus Ltd (Mexican Bocote)
Digital
Audial S5 • Pi2AES 2.0
Cables
Forza Audio Works • Blue Jeans • DH Labs • Periapt
Power
Farad • Tomanek
Sources
Roon • Tidal • Qobuz
Linear Tube Audio MZ3
Headphones
HifiMan Sundara • HiFiMan Arya Stealth Edition • ZMF Vérité Closed Ltd (Stabilised) • ZMF Atrium Open Ltd (Hawaiian Koa) • ZMF Aeolus Ltd (Mexican Bocote)
Digital
Audial S5 • Pi2AES 2.0
Cables
Forza Audio Works • Blue Jeans • DH Labs • Periapt
Power
Farad • Tomanek
Sources
Roon • Tidal • Qobuz
-
- Posts: 4185
- Joined: Mon Feb 03, 2014 9:53 am
- Location: The end of the road in Suffolk Coastal.
- Has thanked: 10 times
- Been thanked: 6 times
Re: NVA 20 Pre - Can you alter it ?
The P20 is tiny and although the little stepped attenuator that Tisbury use can almost certainly be fitted (I never tried it but it's small enough I think), the gain in very low level channel balance (without fiddling) may be countered by a (to me) slightly deadened presentation. Even the stock pot needed its legs trimming back to get inside the P20 case... That little film pot used really is a very good example of the type despite looks and cost.
Cancel the P20 order and see about a P50. Far more possibilities there and similar price to a 'new' P50. You also have a slightly added shielding luxury of SC cable from volume control to output sockets.
Oh by the way, the current P20's have the 'lid' inset into the bottom all round the case rather than the top on front and back, so removing said 'bottom cover' may well be more difficult without the chance of leaving a scar...
Cancel the P20 order and see about a P50. Far more possibilities there and similar price to a 'new' P50. You also have a slightly added shielding luxury of SC cable from volume control to output sockets.
Oh by the way, the current P20's have the 'lid' inset into the bottom all round the case rather than the top on front and back, so removing said 'bottom cover' may well be more difficult without the chance of leaving a scar...
Hanging on in quiet desperation is the English way...The time has gone, The song is over, Thought I'd something more to say...
-
- Posts: 149
- Joined: Thu Nov 01, 2018 5:02 pm
- Location: Liverpool
- Has thanked: 60 times
- Been thanked: 116 times
Re: NVA 20 Pre - Can you alter it ?
Will just let the P20 arrive and see what comes from that . I have very poor mechanical skills so I am not going to attempt anything that will damage the unit . Rather just keep it as it is and use it . Will make my own passive using the Acoustic Dimension donation which is a easy job anyway .
Nearly forgot which is rude of me , thank you all for your help and advice it is much appreciated.
Nearly forgot which is rude of me , thank you all for your help and advice it is much appreciated.
- Ithilstone
- Posts: 570
- Joined: Mon Jun 01, 2015 10:54 am
- Has thanked: 73 times
- Been thanked: 61 times
Re: NVA 20 Pre - Can you alter it ?
Going by this page
http://www.acoustic-dimension.com/atten ... s-main.htm
there is no chance to fit it in P20
and just about enough space in P50 as you have around 50mm space to play with
It would comfortably sit in something like AP50/70 ;] but then most SA's would
http://www.acoustic-dimension.com/atten ... s-main.htm
there is no chance to fit it in P20
and just about enough space in P50 as you have around 50mm space to play with
It would comfortably sit in something like AP50/70 ;] but then most SA's would
Nothing to see here...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
-
- Posts: 149
- Joined: Thu Nov 01, 2018 5:02 pm
- Location: Liverpool
- Has thanked: 60 times
- Been thanked: 116 times
Re: NVA 20 Pre - Can you alter it ?
Thank you for the definitve answer could anyone tell me what the psecifications are for a P80 Pre ? Is this still a straight volume pot or is it a stepped attenuator ?
- Fretless
- Posts: 9341
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1520 times
- Been thanked: 2314 times
Re: NVA 20 Pre - Can you alter it ?
P80 was an old model.
The current P90 has separate L/R pots and can be both pot or SA.
The current P90 has separate L/R pots and can be both pot or SA.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: NVA 20 Pre - Can you alter it ?
I bought a p20 in the current sale- bargain.
I have a p50 already- fine pre
The p20 is more compact and great for limited space but not a patch on the p50- to remedy this I replaced some of the signal wires with ssc I also ordered and I’m currently happy with it.
I have a p50 already- fine pre
The p20 is more compact and great for limited space but not a patch on the p50- to remedy this I replaced some of the signal wires with ssc I also ordered and I’m currently happy with it.
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources