Great piece of equipment
Because of how it’s supplied it’s possible to change the end socket or even extend the flying lead length.
I was planning to extend the flying lead to 10meters having the mini BMU well away from its family- apart from separation anxiety does any suspect a 10 meter lead to a socket block be degrading in any way
Cheers peter
Mini BMU
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Mini BMU
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
- Posts: 8586
- Joined: Thu Jul 12, 2012 7:16 am
- Has thanked: 24 times
- Been thanked: 399 times
Re: Mini BMU
The only way would be to take it part desolder the lead and re solder a large lead.
I can see no reason why you can't plug a long extension lead in to it and your equipment in to the extension lead
I can see no reason why you can't plug a long extension lead in to it and your equipment in to the extension lead
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: Mini BMU
Cheers
Unfortunately I had a catastrophic transformer melt- my fault- reshaped the case too! Doc replaced the transformer and agreed for me to repair.
So cable is carte blanc so to speak following the original design
Unfortunately I had a catastrophic transformer melt- my fault- reshaped the case too! Doc replaced the transformer and agreed for me to repair.
So cable is carte blanc so to speak following the original design
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- karatestu
- Posts: 5983
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1881 times
- Been thanked: 1418 times
Re: Mini BMU
Holy melting transformers Batman.Would did you do ? Never witnessed such a thing.
10 metres of cable to bmu will make sod all difference.
DIY FREE ZONE