Hi guys
We had a recent topic on speaker isolation/ coupling so was wondering what your tables are supported upon.
I’ve had a variety of options over the years and depending on the turntable- eg my Townsend Avalon & Rock were on cut railway sleepers on metal based turntable table whereas the funk firm Vector was on a light metal wall support & glass shelf. My Thorens TD321 played on anything-usually an Mdf record storage cube. My current deck is (from bottom up) on mdf storage cube, thick rubber matt cut from a railway platform crossing, oak shelf, 3 heavy door stops supporting another oak shelf upon which is a large granite tile then the deck. Not sure why but it works
What’s your set up
Turntable s
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Turntable s
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
- Posts: 766
- Joined: Sat Jul 01, 2017 12:51 pm
- Location: South yorkshire
- Has thanked: 1 time
- Been thanked: 364 times
- Contact:
Re: Turntable s
I have my decks sat on a built in cupboard. The jvc just sit on that, the lenco sits on a slate slab that I have had for years. Nothing special.
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
- Jonty2547
- Posts: 298
- Joined: Wed Sep 21, 2016 8:10 pm
- Location: Suffolk
- Has thanked: 0
- Been thanked: 0
Re: Turntable s
Nothing special here, just a butchered £15 TT shelf from Gumtree that i welded and sprayed to look a bit more eye friendly, then added some spikes and a granite chopping board and finally a plywood base.
Does it sound better than being sat on a rack?
I think so, and certainly doesn't suffer from footfall.
Does it sound better than being sat on a rack?
I think so, and certainly doesn't suffer from footfall.
TT- Thorens TD160B MKII with SME 3009, SL1210 and PL-71. Amps-NVA P50sa/A40's & Phono 1. CDP- Sony X555ES. Speakers-B&W 705 with LS1.
Headphone system Bushmaster II, Capella amp, Pi 3B+ with Hifiberry Digi+ Pro & Nighthawk cans.
Headphone system Bushmaster II, Capella amp, Pi 3B+ with Hifiberry Digi+ Pro & Nighthawk cans.
- karatestu
- Posts: 5983
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1881 times
- Been thanked: 1418 times
Re: Turntable s
Ooooo, a PL71 ?
About time i got started fettling the one i have in my possession.
About time i got started fettling the one i have in my possession.
DIY FREE ZONE
- CN211276
- Posts: 6562
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1433 times
- Been thanked: 992 times
Re: Turntable s
My vintage Rega Planar 3 is on top of a substantial wooden rack.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
- Lindsayt
- Posts: 4235
- Joined: Fri Jul 13, 2012 9:06 pm
- Has thanked: 1115 times
- Been thanked: 702 times
Re: Turntable s
Mine are on the floor. The EMT 950 comes with 2 substantial side panels that would have gotten it to desk height in the radio station.
The EMT 930, I tried it on my Sound Organisation turntable table that was essential equipment for my LP12, but it sounds better on the floor.
I site my turntables well away from my speakers. 9 metre speaker cable lengths required.
The EMT 930, I tried it on my Sound Organisation turntable table that was essential equipment for my LP12, but it sounds better on the floor.
I site my turntables well away from my speakers. 9 metre speaker cable lengths required.
- zebbo
- Posts: 1746
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 29 times
Re: Turntable s
I would love to get my TT on to a dedicated wall shelf but that's not going happen. Instead, it sits atop the, dare I say it?, RACK, with a 20mm thick black acrylic top. I messed around with all sorts of feet from spikes to soft sorbothane, wood, hard rubber etc, etc but actually finished up with correctly "tuned" springs. Seems to work ok.
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!)
-
- Posts: 4185
- Joined: Mon Feb 03, 2014 9:53 am
- Location: The end of the road in Suffolk Coastal.
- Has thanked: 10 times
- Been thanked: 6 times
Re: Turntable s
I'm sure it's fine, but please don't assume that mass loading a lightweight deck like this is the best route, as the bass 'musicality' suffers badly with this deck if the siting's not ideal. If you haven't done already, why not try a light rigid 'shelf' in between either spiked or otherwise decoupled from the rack underneath, listening to the 'tunefulness' of the bass as you do so. The best for an older Rega was always their wall bracket in my experience.
Hanging on in quiet desperation is the English way...The time has gone, The song is over, Thought I'd something more to say...
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: Turntable s
I’ve recently looked at the current range of rega wall supports and believe they would fit other brands but as usual are over priced- I cut up an old sound organisation tube steel table and bolted it to the wall- love recycling
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
- CN211276
- Posts: 6562
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1433 times
- Been thanked: 992 times
Re: Turntable s
WAF to consider and I'm not very good with DIY._D_S_J_R_ wrote: ↑Sun Dec 02, 2018 11:18 amI'm sure it's fine, but please don't assume that mass loading a lightweight deck like this is the best route, as the bass 'musicality' suffers badly with this deck if the siting's not ideal. If you haven't done already, why not try a light rigid 'shelf' in between either spiked or otherwise decoupled from the rack underneath, listening to the 'tunefulness' of the bass as you do so. The best for an older Rega was always their wall bracket in my experience.
I do not play a lot of vinyl, it is well away from the speakers and the bass sounds ok to me.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc