'Popping/thumping' sound from system
-
- Posts: 362
- Joined: Tue Nov 21, 2017 9:54 pm
- Has thanked: 57 times
- Been thanked: 156 times
'Popping/thumping' sound from system
System is Rega P6 with Goldring Excel GS (MC) cartridge into a Phono 2 and then through a Rega Elicit-R. Main source is the turntable and, every so often, I'm getting a relatively low level but quite discernible noise somewhere between a pop and a thump. No other system noise audible at the levels I listen at. The turntable is on a dedicated wall support, within a fireplace (fire removed ), the Phono 2 on the top shelf of a rack unit directly below it, the TT PSU and CDP on the shelf below that them the Elicit-R at the bottom, on the ground. Speakers are either side of the fireplace and the Phono 2 PSU is beyond the right hand speaker, so about 4 feet or so away from the head unit and other kit. Any ideas or suggestions for what it might be and what I might be able to do to remove it. It's frustrating because the Phono 2 is such a significant step up from my previous Rega Fono MC anyway, but I know I can't be hearing it at its best if its suffering from some kind of interference. Any thoughts gratefully received. Thanks.
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: 'Popping/thumping' sound from system
Almost certainly something in the house is switching on and off and has no suppressor on the switch, you are hearing the contact spark.
-
- Posts: 362
- Joined: Tue Nov 21, 2017 9:54 pm
- Has thanked: 57 times
- Been thanked: 156 times
Re: 'Popping/thumping' sound from system
Ah. So, what, domestic appliances, do you think? Could it be a fridge or something similar? Is there any plug-in device I could use to suppress the sound and/or try to identify the culprit?
- savvypaul
- Posts: 8729
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3026 times
- Contact:
- Fretless
- Posts: 9341
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1520 times
- Been thanked: 2315 times
Re: 'Popping/thumping' sound from system
Would a BMU solve this?
Could be a heating system / boiler, fridge, freezer. Maybe something external to the home - large installations in the neighbourhood.
Could be a heating system / boiler, fridge, freezer. Maybe something external to the home - large installations in the neighbourhood.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
-
- Posts: 362
- Joined: Tue Nov 21, 2017 9:54 pm
- Has thanked: 57 times
- Been thanked: 156 times
Re: 'Popping/thumping' sound from system
Doesn't sound like a mobile phone. It happens pretty regularly, every few minutes or so, but I've not been so exercised with it as to time it or anything. I'm racking my brain to think of devices that might switch on and off and I'm not really getting much further than the fridge. Maybe lights? Of course, if it is something from outside I'd guess there's little I can do about it but I'd like to do as much diagnosing within the house as I can to start with. The Rega Fono wasn't susceptible to it - but, there again, it didn't sound anywhere near as good as the Phono 2, so it's something I'm prepared to live with if eradication proves impossible.
- CN211276
- Posts: 6563
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1433 times
- Been thanked: 992 times
Re: 'Popping/thumping' sound from system
Would a DC blocker help?
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
- guydarryl
- Posts: 1153
- Joined: Wed Jul 11, 2012 10:43 pm
- Location: suffolk
- Has thanked: 27 times
- Been thanked: 18 times
Re: 'Popping/thumping' sound from system
If the noise is quite regular/every few minutes, you could go around the house unplugging individual appliances to see whether they can be eliminated as possible causes.
LP12, Ittok, DV10X5, Phono2(twin supply), P50SA , Art Audio Quintet, LS5, SSC, Rega Ela mk1
Sony cdp xb930, Alessandro ms1
Sony cdp xb930, Alessandro ms1
- Andy-831
- Posts: 481
- Joined: Mon Aug 07, 2017 8:34 am
- Location: Lancs / Yorks Moors
- Has thanked: 110 times
- Been thanked: 43 times
Re: 'Popping/thumping' sound from system
I have my phono 2 wrapped up in tin foil currently. It looks like its ready to be popped into the oven , but with the tinfoil and a bit of judicious relocation of equipment with transformers allied to moving the Phono 2 as far away from internet interference as I can get it seems to have tamed it.
Analogue
401 / PU7 / AT33ev
Longdog Audio Quartz Garrard PSU.
Longdog Audio Phono stage (MCj1)
Digital
NVA BMU.
Innuos Zen / Caiman Seg and Dorado
Cambridge CXC
Amps
Tron Seven Linestage.
Bel Canto Set 40, or LDA 300B Set Monoblocks
Speakers
Tannoy GRF Memory.
Tannoy ST100 Supertweeters
401 / PU7 / AT33ev
Longdog Audio Quartz Garrard PSU.
Longdog Audio Phono stage (MCj1)
Digital
NVA BMU.
Innuos Zen / Caiman Seg and Dorado
Cambridge CXC
Amps
Tron Seven Linestage.
Bel Canto Set 40, or LDA 300B Set Monoblocks
Speakers
Tannoy GRF Memory.
Tannoy ST100 Supertweeters
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: 'Popping/thumping' sound from system
If it is an airborne signal than no a DC blocker or BMU wont help. Any switch creates a spark, older and more worn the worse, a spark creates a RF signal (original morse was just sparks). The very high gain of the mc P2 means it picks it up.
If it is a mains borne blip then a BMU will get rid of it - sorry it is suck it and see.
If it is a mains borne blip then a BMU will get rid of it - sorry it is suck it and see.