Page 11 of 13
Re: Doc Mod Drivers
Posted: Fri Mar 29, 2019 12:37 pm
by jimbob
Yeah I had the 8 inch for an Allison 6 referb project I did a year or so ago and the drivers were top notch. I have no doubt these 12 inch ones will absolutely deliver the goods... I just need to decide on their application now...
Re: Doc Mod Drivers
Posted: Fri Mar 29, 2019 1:20 pm
by Latteman
I took inspiration from Karatestu- also Stevetheshadow- built diy BBC but mid & tweeter forward firing & 12” upfiring.
Re: Doc Mod Drivers
Posted: Fri Mar 29, 2019 1:31 pm
by jimbob
That sounds like a fun project! Any photos or a link to a thread about them on here?
One of the ideas I’m toying with is also a BBCube copy but using a concrete cast rather than plywood. I wanted to do a concrete cast cube ages ago but bottled it and just did the Allison refurb instead. I think now might be the time to actually give it a go.
Re: Doc Mod Drivers
Posted: Fri Mar 29, 2019 1:45 pm
by Latteman
Check the diy section- plenty in there
Re: Doc Mod Drivers
Posted: Tue Apr 02, 2019 1:35 pm
by setting son
Doc,
Could you post cut out and basket (recess) dimensions for the drivers as I'm sure, like me, some do design work before ordering them?
Re: Doc Mod Drivers
Posted: Tue Apr 02, 2019 3:34 pm
by Dr Bunsen Honeydew
Which driver do you need. I have to hand the 12 inchers specs.
Specifications:
Power 200/400 W max.
Impedance 8 Ohms
Resonance frequency 30 Hz +-10%
Frequency range 30-3000 Hz
SPL 86 db, 40 oz magnet (size 140 x 20 mm)
4-LAYER VOICE COIL 50MM ASV
Outer diameter 304 mm
Hole circle cut approx. 280 mm
Installation depth approx. 136 mm
Weight 3,75 kg
Re: Doc Mod Drivers
Posted: Tue Apr 02, 2019 7:00 pm
by setting son
The 8 and 5.5, please.
Re: Doc Mod Drivers
Posted: Tue Apr 02, 2019 7:15 pm
by Dr Bunsen Honeydew
8 inch
Power max. 500W
Power rms 250W
Overall depth 95mm
Magnet diameter 140mmØ
Mounting centres 194mmØ
Diameter 200mm (8")
Frequency response 27Hz - 6kHz
Magnet weight 1.1kg (40oz)
SPL @ 1W/1m 85.5dB
Weight 2.76kg
Re: Doc Mod Drivers
Posted: Tue Apr 02, 2019 7:20 pm
by Dr Bunsen Honeydew
6.5 inch
Power (MAX): 250W
Power (RMS): 125W
Impedance: 8 ohms
Voice Coil: 4 layer
Overall depth: 85mm
Magnet diameter: 120mmØ
Mounting centres: 157mmØ
Diameter: 6.5 inch (160mm)
Frequency Response: 35Hz - 8kHz
Magnet Weight: 30oz
SPL @ 1W/1m: 90dB
Weight: 1.92kg
Re: Doc Mod Drivers
Posted: Tue Apr 02, 2019 7:28 pm
by Dr Bunsen Honeydew
5.25 inch
Power (MAX): 200W
Power (RMS): 100W
Impedance: 8 ohms
Voice Coil: 4 layer
Overall Depth: 75mm
Magnet Diameter: 100mmØ
Mounting Centres: 122mmØ
Diameter: 13.5cm (5.25")
Frequency Response: 35Hz - 8kHz
Magnet Weight: 20oz
SPL @ 1W/1m: 89dB
