Balanced line mains
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
- zebbo
- Posts: 1751
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 30 times
Re: Balanced line mains
£490 (see above).
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Soundsmith Zephyr MIMC, Parasound JC3+, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!)
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
- Keithh
- Posts: 72
- Joined: Tue Aug 28, 2012 5:03 pm
- Location: Gwynedd
- Has thanked: 0
- Been thanked: 11 times
Re: Balanced line mains
Doc, did you manage to put a tape measure on the boxes?
Of all noises, I think music is the least disagreeable. - Samuel Johnson
In == Vortexbox + Raspberry Pi + BOSS DAC/ Goldring 1042 + SL-1210MK2 + Phono 1
Shaking it all about == P50SA + SP + A80s
Out == LS6 biwire + B&W 602 S3
Bubbling under == BMU
In == Vortexbox + Raspberry Pi + BOSS DAC/ Goldring 1042 + SL-1210MK2 + Phono 1
Shaking it all about == P50SA + SP + A80s
Out == LS6 biwire + B&W 602 S3
Bubbling under == BMU
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
- Keithh
- Posts: 72
- Joined: Tue Aug 28, 2012 5:03 pm
- Location: Gwynedd
- Has thanked: 0
- Been thanked: 11 times
Re: Balanced line mains
Ok that works for me. I would need UK square pin power out.
Couple of questions:
Couple of questions:
- Is there a power toggle switch?
- Would there be any issue running a plug block from one of the sockets?
Of all noises, I think music is the least disagreeable. - Samuel Johnson
In == Vortexbox + Raspberry Pi + BOSS DAC/ Goldring 1042 + SL-1210MK2 + Phono 1
Shaking it all about == P50SA + SP + A80s
Out == LS6 biwire + B&W 602 S3
Bubbling under == BMU
In == Vortexbox + Raspberry Pi + BOSS DAC/ Goldring 1042 + SL-1210MK2 + Phono 1
Shaking it all about == P50SA + SP + A80s
Out == LS6 biwire + B&W 602 S3
Bubbling under == BMU
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Balanced line mains
It doesn't need an on off switch the same as a mains block doesn't need it.
No problem plugging anything into the output apart from something that tries to balance the balance if that makes sense.
No problem plugging anything into the output apart from something that tries to balance the balance if that makes sense.
- Keithh
- Posts: 72
- Joined: Tue Aug 28, 2012 5:03 pm
- Location: Gwynedd
- Has thanked: 0
- Been thanked: 11 times
Re: Balanced line mains
Ok that is a firm request from me please
Of all noises, I think music is the least disagreeable. - Samuel Johnson
In == Vortexbox + Raspberry Pi + BOSS DAC/ Goldring 1042 + SL-1210MK2 + Phono 1
Shaking it all about == P50SA + SP + A80s
Out == LS6 biwire + B&W 602 S3
Bubbling under == BMU
In == Vortexbox + Raspberry Pi + BOSS DAC/ Goldring 1042 + SL-1210MK2 + Phono 1
Shaking it all about == P50SA + SP + A80s
Out == LS6 biwire + B&W 602 S3
Bubbling under == BMU
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Balanced line mains
Nice looking unit Doc - If my lecky wasn't made so good by fine Scottish Mountain water (Hydro) I would be most intrested......
Look forward to users findings.
Would be a challenge for me to hide top exiting mains lead's, sure I could manage though......
Look forward to users findings.
Would be a challenge for me to hide top exiting mains lead's, sure I could manage though......