CN211276 wrote: ↑Tue Mar 24, 2020 10:59 am
As I suspected the big obsticle to configuring the Cisco 2960G is Windows 10. There are on line solutions which I am exploring.
Putty is your answer. It's a free download. Great program. As well as switch configuration it allows me to log in to my Linux servers from anywhere in the world (with an internet connection)
Old versions of windows used to have TTY built in. Now you need to have putty.
Also old laptops used to have serial ports built in to them. Now you need a USB to serial adapter. I've got one somewhere.
Plus you need a console cable that comes with every new Cisco switch. I've got dozens of them.
Get the cable and, if required the adapter and you're in business.
For your putty connection it's pretty much the default Serial settings:
https://www.cisco.com/c/en/us/support/d ... 300-a.html
The thing to watch for is what Com number your USB adapter is using. Or the com number of your serial port on an older laptop.
Once you're physically connected, the next step is getting your head round the MS DOS type text based interface that you have with Cisco business switches. At first this will seem daunting. By the time you've configured 5 switches you'll start to get comfortable with it. By the time you've installed hundreds of switches you'll appreciate what a great time saving feature this is.
A little tip. When you power on an unconfigured Cisco switch you will be presented with the option to do a "quick configuration" on it. Say No to this. It's better to do a slow manual configuration, because this involves copying and pasting a pre-prepared config text file into the putty window, which is actually an amazingly fast and reliable way to configure these, once you've grasped what you're doing, and have someoene that knows what they're doing in creating the config text file.
Edit: also an unconfigured Cisco switch
should still work for transfering data in your network.
If you power it on and connect your devices to it, do all the devices talk to each other? The same as if you had them all plugged into the RJ45 ports on your Router?
The configuration of the switch is for getting the best out of it for your network's needs.