NVA AP10P-Cubes.

Mon Apr 28, 2014 7:50 pm

MK1LN4E:) wrote: Hi Dr I have borrowed an ap10 to demo, my question is would my speakers be ok with this amp and vice versa, thought I would check before going ahead ?

It depends 1/ how loud, 2/ how big an acoustic it has to drive. Suck it and see, if it is struggling it will let you know, it wont sound very good. Also if you run the amp on its side you can check the base plate for heat, if it gets "ouch" then it is definitely not a happy little bunny and I would switch it off.

MK1LN4E:) · Unread post by **MK1LN4E:)** » Mon Apr 28, 2014 8:08 pm

Dr Bunsen Honeydew wrote:
MK1LN4E:) wrote: Hi Dr I have borrowed an ap10 to demo, my question is would my speakers be ok with this amp and vice versa, thought I would check before going ahead ?
It depends 1/ how loud, 2/ how big an acoustic it has to drive. Suck it and see, if it is struggling it will let you know, it wont sound very good. Also if you run the amp on its side you can check the base plate for heat, if it gets "ouch" then it is definitely not a happy little bunny and I would switch it off.

Ok doc, won't be pushing it loud, kids are in :D

jimbob · Unread post by **jimbob** » Mon Apr 28, 2014 9:33 pm

MK1LN4E:) wrote:
Dr Bunsen Honeydew wrote:
MK1LN4E:) wrote: Hi Dr I have borrowed an ap10 to demo, my question is would my speakers be ok with this amp and vice versa, thought I would check before going ahead ?
It depends 1/ how loud, 2/ how big an acoustic it has to drive. Suck it and see, if it is struggling it will let you know, it wont sound very good. Also if you run the amp on its side you can check the base plate for heat, if it gets "ouch" then it is definitely not a happy little bunny and I would switch it off.
Ok doc, won't be pushing it loud, kids are in :D

Enjoy!! :D :D :D

southall-1998 · Mon Apr 28, 2014 9:39 pm

MK1LN4E:) wrote:
Dr Bunsen Honeydew wrote:An AP10p will drive Cube 1 and Cube 2.
Hi Dr I have borrowed an ap10 to demo, my question is would my speakers be ok with this amp and vice versa, thought I would check before going ahead ?

Oi, next time you start your own thread

Looking forward to your findings on the NVA/B&W marriage. (Odd couples)

S.

MK1LN4E:) · Unread post by **MK1LN4E:)** » Mon Apr 28, 2014 9:46 pm

Ok all connected had to use 6mm copper singles that I made for my jumpers

,I know, needs must. Hey oh very nice clinical sound IMHO can't go to loud thou but not much need really, would like to test tomorrow a bit louder to see how the sound changes. Apparently I'm a lazy bxxxxxx

so must turn off now well at least get of my arse up and do some fxxxxxg jobs

she did'nt like the hand

MK1LN4E:) · Unread post by **MK1LN4E:)** » Mon Apr 28, 2014 9:48 pm

BTW smoke is a good thing right

jimbob

jimbob · Unread post by **jimbob** » Mon Apr 28, 2014 9:52 pm

MK1LN4E:) wrote:BTW smoke is a good thing right jimbob

Yes as long as it's coming from your stove... :D

Be kind to my ickle amp!

jimbob · Unread post by **jimbob** » Mon Apr 28, 2014 9:54 pm

Don't forget to let us know how you find the SSC interconnects too bud

MK1LN4E:) · Unread post by **MK1LN4E:)** » Mon Apr 28, 2014 10:02 pm

jimbob wrote:Don't forget to let us know how you find the SSC interconnects too bud

It's on my todo list

southall-1998 · Mon Apr 28, 2014 11:43 pm

The crap that comes out of people's fingertips !! This will NEVER put me off from buying cubes.

S.

http://www.audiochews.com/discussion/70 ... about-them

NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

Re: NVA AP10P-Cubes.

NVA Info

Contacts