Made myself a new tonearm- I usually modify tonearms but this one is fully me.
12” wooden wand, single pivot bearing- very small ring bearing with a running shoe spike- headshell is a cutdown sme type, litz wire underneath in a cut groove pva glue sealed.
Took a week to make-
First listen to it installed and bedding in.
It’s interesting- not what I was expecting- there is a character to it - I can’t decide nor describe yet what I’m hearing. It’s not unpleasant and it’s not ‘exciting nor dull’ it appears to be ‘just there /or not’ the level of detail and image is definitely different- more listening was required
One day in and I’m beguiled- it’s addictive- quieter, when a note stops it stops- I can tell if a singer is hushed- it’s so nice to sit n listen to- my sound stage and quality of tone on instruments is also different-
This is a cheap pine dowel from BnQ so I’m considering a different wood.
my screen size in pixels
New Arm
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
New Arm
- These users thanked the author Latteman for the post (total 6):
- Fretless (Mon May 23, 2022 8:22 pm) • slinger (Mon May 23, 2022 8:25 pm) • karatestu (Tue May 24, 2022 4:50 am) • CycleCoach (Tue May 24, 2022 9:37 am) • Grumpytim (Tue May 24, 2022 11:46 am) • SteveTheShadow (Tue May 24, 2022 1:30 pm)
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
- Posts: 766
- Joined: Sat Jul 01, 2017 12:51 pm
- Location: South yorkshire
- Has thanked: 1 time
- Been thanked: 364 times
- Contact:
Re: New Arm
Try a tube instead of a solid arm wand, a solid wand resonates a hell of a lot more than a tube does. A solid wand can sound abit odd, something you cant put your finger on in the midrange.
Guess how i know
Also try a flat wand, i made a flat one years ago fom acrylic that was quite good that i may revisit if i get the time
Guess how i know
Also try a flat wand, i made a flat one years ago fom acrylic that was quite good that i may revisit if i get the time
Last edited by Vinyl-ant on Tue May 24, 2022 6:54 pm, edited 1 time in total.
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
-
- Posts: 766
- Joined: Sat Jul 01, 2017 12:51 pm
- Location: South yorkshire
- Has thanked: 1 time
- Been thanked: 364 times
- Contact:
Re: New Arm
Heres a link to what i did, starts about 5 years ago.
https://audio-talk.co.uk/phpBB3/viewtopic.php?t=6876
Hopefully theres some nuggets in there for you to look at
https://audio-talk.co.uk/phpBB3/viewtopic.php?t=6876
Hopefully theres some nuggets in there for you to look at
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
- Latteman
- Posts: 1225
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 561 times
- Been thanked: 301 times
- Contact:
Re: New Arm
Wow- that was an interesting but long read- thanks- it certainly helps having the tools for the job- your level of finish and skill far out shines mine- but I’m happy with mine for the moment
The science is interesting and have reverse worked your descriptions to mine to work out what is happening-🫣
The science is interesting and have reverse worked your descriptions to mine to work out what is happening-🫣
Analogue Source -
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH- RigB 9
GL-59; ARB uni pivot; AT- Signet mc
Nva phono mm/mc
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources