Powered Cube to Cubix (P7) to Cubix Pro (P11)
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
-
wallace
- Posts: 980
- Joined: Thu Jul 12, 2012 9:03 am
- Location: Bridgwater ,Somerset.
- Has thanked: 0
- Been thanked: 0
Re: Powered Cube 1 (Cubix pro head unit)
Reserve not met..And never will be
Revox B795,,NVA PHONO 1,Teac PD-H500C,Squeezebox Touch,Bushmaster MKII,NVA AP70,LS5,Royd Minstrels i/c's SSC's. .
Sony Laptop,E-Dac, NVA AP10P, LS3,SSC,Royd Coniston R.Grado RS1
Sony Laptop,E-Dac, NVA AP10P, LS3,SSC,Royd Coniston R.Grado RS1
-
terrybooth
- Posts: 4399
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 252 times
Re: Powered Cube 1 (Cubix pro head unit)
No, you just need a skyhook. Problem solved.
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Powered Cube 1 (Cubix pro head unit)
Well the build progresses, as shown in the pic the speakers are built apart from fitting the bass drivers, as I don't fit them until I test the amps electrically. Power supplies are built apart from cables and one type of capacitor which I have run out of and ordered yesterday from Farnell. It is a large polypropylene bypass. Sods law I broke one of the speaker stands I will use for the speaker pair by standing on it to change a light bulb 
so that is gluing in the picture as well.
Still in line for being ready by mid week.
so that is gluing in the picture as well.Still in line for being ready by mid week.
-
Lordie82360now
- Posts: 100
- Joined: Fri Mar 13, 2015 5:36 pm
- Location: Middle of England
- Has thanked: 0
- Been thanked: 34 times
Re: Powered Cube 1 (Cubix pro head unit)
Flux capacitor to take them up to 88mph and bingo!
Digital Source: Eversolo dmp-A6, Crucial external USB SSD, iPad 10th Gen 64mg, iPhone 8.
Amplifier: Arcam AS20.
Interconnects: Audioquest Carbon Coaxial and Optical.
Speakers: Quad S2 with NVA LS1.
Headphones: Bayer DT770 Pro LE.
Amplifier: Arcam AS20.
Interconnects: Audioquest Carbon Coaxial and Optical.
Speakers: Quad S2 with NVA LS1.
Headphones: Bayer DT770 Pro LE.
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Powered Cube 1 (Cubix pro head unit)
Right side with two modules is now working, out today on Nadia duties, will finish the other side Friday.
-
Stemcor1990
- Posts: 351
- Joined: Wed Nov 05, 2014 11:06 pm
- Has thanked: 6 times
- Been thanked: 23 times
Re: Powered Cube 1 (Cubix pro head unit)
Excellent news. I would very much like to hear this incarnation of the pro. On a different note, the phono 2 I collected from you last week sounds like a swarm of bees on one channel. Swapping leads etc has not solved the problem. Can I "double-up" by bring the 2 for some Doc tlc and a listen to the new pro.
-
_D_S_J_R_
- Posts: 4185
- Joined: Mon Feb 03, 2014 9:53 am
- Location: The end of the road in Suffolk Coastal.
- Has thanked: 10 times
- Been thanked: 6 times
Re: Powered Cube 1 (Cubix pro head unit)
Timed just right for Saturday 
Hanging on in quiet desperation is the English way...The time has gone, The song is over, Thought I'd something more to say...
