UK Mains Elec Stoooopidity
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
UK Mains Elec Stoooopidity
I don't want to let this matter die and it is spread across a few threads. So focus discussion here.
We have nattered long and hard about the advantages of Radial Circuit v the stooopidity of Ring Circuits. So now the other one that winds my cogs, bayonet fitting light bulbs, WTF, how stoopid can you get. They are a complete PITA, easily damaged, easy to fit badly, bulbs pop out. Every where else is sensible per usual and uses a screw fit, far safer, less chance of shock, less chance of damage.
It seems IKEA are now helping us by selling an adaptor for 10p, good for them. Coherent would charge £100 and MartinT and MikeMusic would buy them.
CAMPAIGN FOR COMMON SENSE = try and get change to Radial Circuits and screw fit bulbs.
We have nattered long and hard about the advantages of Radial Circuit v the stooopidity of Ring Circuits. So now the other one that winds my cogs, bayonet fitting light bulbs, WTF, how stoopid can you get. They are a complete PITA, easily damaged, easy to fit badly, bulbs pop out. Every where else is sensible per usual and uses a screw fit, far safer, less chance of shock, less chance of damage.
It seems IKEA are now helping us by selling an adaptor for 10p, good for them. Coherent would charge £100 and MartinT and MikeMusic would buy them.
CAMPAIGN FOR COMMON SENSE = try and get change to Radial Circuits and screw fit bulbs.
-
- Posts: 1137
- Joined: Sat Jun 08, 2013 11:01 am
- Location: Kidwelly, West Wales
- Has thanked: 14 times
- Been thanked: 11 times
- Contact:
Re: UK Mains Elec Stoooopidity
I have a radial run to my audio room from my consumer unit - the right side of the RCD too!
I also have numerous ES and SES light bulb fittings which I like better than bayonet fit.
However, I have noted over a period of time the ES versions can work loose. Perhaps I'm not tightening them up enough when I fit them?
Alfi.
I also have numerous ES and SES light bulb fittings which I like better than bayonet fit.
However, I have noted over a period of time the ES versions can work loose. Perhaps I'm not tightening them up enough when I fit them?
Alfi.
I am in the hi-fi trade.
Status: Manufacturer.
Company Name: Analogue innovation.
Contact: a_innovation@btinternet.com
Re: UK Mains Elec Stoooopidity
All Screw Fit bulbs here. As for what is in the wall well i do not give a crap..
- Ithilstone
- Posts: 570
- Joined: Mon Jun 01, 2015 10:54 am
- Has thanked: 73 times
- Been thanked: 61 times
Re: UK Mains Elec Stoooopidity
the buggers changed the price
but 50p each is still very good value
http://www.ikea.com/gb/en/products/smar ... -90295615/
but 50p each is still very good value
http://www.ikea.com/gb/en/products/smar ... -90295615/
Nothing to see here...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
Re: UK Mains Elec Stoooopidity
Dont honestly see what your gaining, you basically extending a bayonet bulb?
- Ithilstone
- Posts: 570
- Joined: Mon Jun 01, 2015 10:54 am
- Has thanked: 73 times
- Been thanked: 61 times
Re: UK Mains Elec Stoooopidity
It is converter! IKEA only sells E27 light bulbs (as it is standard in the rest of the Europe)
and most UK has only bayonet fitting
and most UK has only bayonet fitting
Nothing to see here...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
-
- Posts: 580
- Joined: Mon Feb 27, 2017 1:47 pm
- Location: East Staffordshire
- Has thanked: 0
- Been thanked: 1 time
Re: UK Mains Elec Stoooopidity
We've just had some wiring work done in the new house. I now have a dedicated radial feed from the consumer unit to four sockets (described by the electrician as the 'clean' circuit). Many new light fittings also installed - all 27mm Edison screw or small Edison screw.
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: UK Mains Elec Stoooopidity
I hope you haven't fitted UK 13amp to that circuit as you have wasted a lot of its potential like MartinT did.
Re: UK Mains Elec Stoooopidity
I'd be genuinely interested to hear how your electrician believes this is a clean circuit as I can't get my head round how it's possible when supplied from the CU feeding the rest of the house as the radial will most likely share a common live and, to all intents and purposes, a common neutral.Simon Hickie wrote: ↑Sat Mar 03, 2018 12:29 pm We've just had some wiring work done in the new house. I now have a dedicated radial feed from the consumer unit to four sockets (described by the electrician as the 'clean' circuit).
I get the advantages as the Doc explains of getting rid of the 13A stuff....
Re: UK Mains Elec Stoooopidity
Yeh i know its a converter, all that is doing is converting the bulb fitting buy you still got the wobbly Bayonet at the converter end as well as extending the length of the bulb.. Just swap out the old fitting.Ithilstone wrote: ↑Sat Mar 03, 2018 10:20 am It is converter! IKEA only sells E27 light bulbs (as it is standard in the rest of the Europe)
and most UK has only bayonet fitting