Heatwave
-
orbscure
- Posts: 38
- Joined: Mon Oct 13, 2014 11:44 am
- Location: South East UK
- Has thanked: 0
- Been thanked: 0
- Contact:
Re: Heatwave
Tell me about it Doc... 8 hrs in a portacabin office (with some sort of ac thankfully), then tram, train and bus home... straight into a shower... now sat with just a pair of shorts on with me fan on full blast! Just ordered a Dyson fan to collect from Argos tomorrow. Expensive, probably not needed very much but 
if I'm putting up with this... 
if I'm putting up with this... Power: Restek MAMP monoblocks
PreAmp: Densen DM20
CDP: Sony SCD-555ES
DAC: M2Tech Young & Palmer PSU
Speakers: JBL4311 studio monitors
Streaming: Bespoke Korus server
Cabling: Belden 9497 speaker cable & NVA SSP interconnects
PreAmp: Densen DM20
CDP: Sony SCD-555ES
DAC: M2Tech Young & Palmer PSU
Speakers: JBL4311 studio monitors
Streaming: Bespoke Korus server
Cabling: Belden 9497 speaker cable & NVA SSP interconnects
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
-
orbscure
- Posts: 38
- Joined: Mon Oct 13, 2014 11:44 am
- Location: South East UK
- Has thanked: 0
- Been thanked: 0
- Contact:
Re: Heatwave
We've had some speed restrictions implemented by our track teams on the trams... and most of the big railways services through East Croydon were running late too... roll on the rain tomorrow!!
Power: Restek MAMP monoblocks
PreAmp: Densen DM20
CDP: Sony SCD-555ES
DAC: M2Tech Young & Palmer PSU
Speakers: JBL4311 studio monitors
Streaming: Bespoke Korus server
Cabling: Belden 9497 speaker cable & NVA SSP interconnects
PreAmp: Densen DM20
CDP: Sony SCD-555ES
DAC: M2Tech Young & Palmer PSU
Speakers: JBL4311 studio monitors
Streaming: Bespoke Korus server
Cabling: Belden 9497 speaker cable & NVA SSP interconnects
-
zebbo
- Posts: 1741
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 28 times
Re: Heatwave
Well it's just pleasantly warm here on the shore of Galway Bay. 
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!) 
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
-
zebbo
- Posts: 1741
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 28 times
Re: Heatwave
Definitely picked the right week to be away, that's for sure! 
Doc, did you not get my PM last week re: A60 & P90 repairs?
Doc, did you not get my PM last week re: A60 & P90 repairs?
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!)
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Heatwave
I replied but some of my sent messages are disappearing. I have told Terry and he was going to investigate it. The answer is yes of course just arrange nearer the time.
-
Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Heatwave
A by product of the heat is that glue joints are not going off, all the work I have done today hasn't set and they are falling apart if I pick them up.
-
terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times