How much did your system cost ?

All general audio posts go here.
User avatar
karatestu
Posts: 5965
Joined: Sun Jan 08, 2017 4:40 pm
Location: North Yorkshire
Has thanked: 1876 times
Been thanked: 1400 times
Great Britain

Re: How much did your system cost ?

Unread post by karatestu »

There is a thread on pfm by a guy with a £100K system who wants to downgrade to something smaller, cheaper and easier to use.
DIY FREE ZONE

User avatar
SteveTheShadow
Posts: 1646
Joined: Thu Sep 12, 2013 5:24 pm
Has thanked: 272 times
Been thanked: 339 times
Great Britain

Re: How much did your system cost ?

Unread post by SteveTheShadow »

Current system cost:
Turntable/arm/cart - £500
DIY valve amp parts cost - £450
DIY speakers parts costs - £400
AppleTV streamer - £70, Apple Music subscription - £9.99pm
Musical Fidelity M1 DAC - £400
Tangent CDII - £150

Total £1970 + the AM monthly subscription.

Costs over lifetime, before, and during the flat earth bollocks phase, then getting out of it, then getting into DIY, then building loads of nondescript meh! before settling on what I have:

I’d rather not think about it. £30000 is a conservative estimate.
Somebody’s telling me the latest scandals.
Somebody’s stepping on my plastic sandals. Joe Jackson (1979)

NSNO2021
Posts: 1010
Joined: Thu Jul 04, 2019 1:06 pm
Location: Industrial waste lands of the north west
Has thanked: 559 times
Been thanked: 488 times
Great Britain

Re: How much did your system cost ?

Unread post by NSNO2021 »

karatestu wrote: Sat Apr 17, 2021 6:52 am There is a thread on pfm by a guy with a £100K system who wants to downgrade to something smaller, cheaper and easier to use.
I might ask him if he fancies a swap 😁
These users thanked the author NSNO2021 for the post:
karatestu (Sat Apr 17, 2021 2:16 pm)
Modified Airlink BPS 3110S with LDA DC filter
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables

User avatar
TheMadMick
Posts: 437
Joined: Tue Jan 31, 2017 9:50 am
Location: SOUTHPORT, UK
Has thanked: 3 times
Been thanked: 141 times
ST_PATRICK'S_SALTIRE

Re: How much did your system cost ?

Unread post by TheMadMick »

Let's face it folks, it's not how much it costs that counts but how much you enjoy it.

I've used a Denon DM38 with a pair of Mission 70's wired with DNM speaker cable and it was really enjoyable.
Blusound Vault 2, P50SA, A80's, BMU, TIS, LS7, MA PL200, Meridian 506 (18 bit).

User avatar
Fretless
Posts: 9320
Joined: Wed Nov 12, 2014 12:15 pm
Location: Somewhere in Holland
Has thanked: 1510 times
Been thanked: 2300 times
Netherlands

Re: How much did your system cost ?

Unread post by Fretless »

For a long time I had a complete Mark Levinson system in use;
a rich friend had bought it but didn't like the sound, he got a Sony ES tower and was happier with that. Knowing I was a hifi-nut he said I could use it and it sat in my 'business side' for several years, used mainly for disco's and BGM. I didn't like the sound either, finding it cold and clinical, and stuck with my modest NVA for personal use.

The ML system: CD Transport, DAC, Pre-amp, Power amp (stereo, size of a beer crate and weighed a ton) massive MIT Terminator cabling and some weird Swiss-made speakers. It must have been in the region of €100,000.

Unfortunately this friend had a severe and very expensive cocaine habit and he eventually reclaimed the setup to pay for that. I won't tell you how it ended for him but it was sad.

What a waste.

Upstairs:
Vinyl
Pro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
Vinyl
Logic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450

antonio66
Posts: 1012
Joined: Mon Jul 29, 2019 8:16 am
Location: Grimsby/Phnom Penh
Has thanked: 1471 times
Been thanked: 414 times
Great Britain

Re: How much did your system cost ?

Unread post by antonio66 »

My no.2 system over here in Cambodia has cost me approx £1250, and for that I'm extremely happy. I have purchased a few pre amp tubes to try, which are not included since I have yet to hear them. The cost of my main system in the uk with vinyl and cd sources has just surprised me, roughly £4.5k, although to start with, the sale of an LP12 for £2,600 really helped.

User avatar
karatestu
Posts: 5965
Joined: Sun Jan 08, 2017 4:40 pm
Location: North Yorkshire
Has thanked: 1876 times
Been thanked: 1400 times
Great Britain

Re: How much did your system cost ?

Unread post by karatestu »

TheMadMick wrote: Sat Apr 17, 2021 8:42 am Let's face it folks, it's not how much it costs that counts but how much you enjoy it.
Agreed. That was not something I was thinking about when I decided to start the thread. We can discuss cost vs enjoyment though. I have little to compare what I have with except a load of 90's olive Naim. The NVA inspired kit wipes the floor with that and would have been much cheaper.

I don't know if I would have come to the same conclusion 20 years ago (much testosterone flying about) when I was seduced by the "excitement" of the Naim stuff. I later realised half the music was missing :roll: Found it now though - RD had boxed it up in black acrylic cases :lol:
DIY FREE ZONE

User avatar
karatestu
Posts: 5965
Joined: Sun Jan 08, 2017 4:40 pm
Location: North Yorkshire
Has thanked: 1876 times
Been thanked: 1400 times
Great Britain

Re: How much did your system cost ?

Unread post by karatestu »

SteveTheShadow wrote: Sat Apr 17, 2021 8:03 am
Costs over lifetime, before, and during the flat earth bollocks phase, then getting out of it, then getting into DIY, then building loads of nondescript meh! before settling on what I have.
Doesn't bare thinking about I agree. Sorry I got you to think about it :whistle:
DIY FREE ZONE

valvesRus
Posts: 562
Joined: Sat Feb 24, 2018 2:34 pm
Has thanked: 25 times
Been thanked: 63 times
Great Britain

Re: How much did your system cost ?

Unread post by valvesRus »

Not a simple question, for several reasons.

1) My memory, I honestly cant remember what I actually paid for most things.

2) A lot of my kit is home made, and sometimes things are broken up and parts reused into new kit.

3) Things may be swapped, or traded making it difficult to value.

IF I sat down and worked out what my currently used kit, and all the spare parts and half completed projects were worth I might be very surprised. :o

User avatar
savvypaul
Posts: 8673
Joined: Tue Oct 11, 2016 7:14 pm
Location: Durham
Has thanked: 1663 times
Been thanked: 2995 times
Contact:
Great Britain

Re: How much did your system cost ?

Unread post by savvypaul »

My hi-fi habit cost me so much that I made it tax deductible...
These users thanked the author savvypaul for the post:
karatestu (Sat Apr 17, 2021 10:05 am)
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/

Post Reply