That would be a clever trick...Vinyl-ant wrote: ↑Fri Oct 02, 2020 2:05 pm I turn everything off that can be turned off when not in use, why would you leave things on when you arent using them?
The f5 warms up quickly enough, so does everything else.
I find it abit silly to leave things on for the sake of half an hours warm up
I dont relish the possibility of something going pop in the middle of the night and waking up dead from smoke inhalation.
Sorry, its one of those hifi things i simply dont get
System warm up
- savvypaul
- Posts: 8673
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1663 times
- Been thanked: 2995 times
- Contact:
Re: System warm up
- CN211276
- Posts: 6547
- Joined: Tue Aug 09, 2016 9:29 am
- Location: Cardiff
- Has thanked: 1423 times
- Been thanked: 987 times
Re: System warm up
I unplug equipment when I go on holiday. Those were the days. I think constantly switching kit on and off is not a good thing. I unplug the tv at night because it is connected to an external dish. A lot of idiots have issues with leaving kit on stand by because they have been brain washed by the climate change nutters. Had a right ding dong with one on Facebook as he thinks I am destroying the planet.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Lindy cat 6 US ethernet cable
Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ
Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat
RIP Doc
Re: System warm up
NVA amps and phonostage on 24/7 for me ( except holidays ). Likewise for my DAC which again draws very little current on idle. I use a Purepower regenerator for all my kit which I think double insures for any nasty mains electrical issues that might happen in the wee hours.
- Latteman
- Posts: 1222
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 555 times
- Been thanked: 299 times
- Contact:
Re: System warm up
Amps always on, volume to zero when not listening
Every thing else off except turntable power as too difficult to reach the plug
Every thing else off except turntable power as too difficult to reach the plug
Analogue Source -
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
- Posts: 35
- Joined: Sun Feb 24, 2019 8:34 pm
- Has thanked: 5 times
- Been thanked: 11 times
Re: System warm up
Mine takes about twenty mins to come on song.
I turn it all off at night.
I turn it all off at night.
Amps: Nva p50 pre, 2 x marantz sm17 power Amps
Digital: Chord hugo
Analogue: Rega P3, Graham slee era v gold
Speakers :Pmc 21,
Cables: speaker, NVA LS6, interconnect, ssp mk2
Digital: Chord hugo
Analogue: Rega P3, Graham slee era v gold
Speakers :Pmc 21,
Cables: speaker, NVA LS6, interconnect, ssp mk2
-
- Posts: 149
- Joined: Thu Nov 01, 2018 5:02 pm
- Location: Liverpool
- Has thanked: 60 times
- Been thanked: 116 times
Re: System warm up
Have to say all electrical items except the fridge and router are switched off when not in use . I did find a real warm up time for the two NVA 20 amps I swapped in to my active system but I think this was because they were similar to new having both been recently upgraded and the capacitors needed to be run in . I would think that they will be fine when used tomorrow as they have had a fair hammering today and in general I have found that with solid state items once they have got over the original burn in they are ready to go and sounding good within about five minutes of switch on . Not noticed any improvement over the next hour or so but then again not had the 20's in the system long enough to tell , tomorrow will be a new day .