Help with phono stage
-
- Posts: 475
- Joined: Tue Apr 16, 2019 4:50 pm
- Has thanked: 100 times
- Been thanked: 77 times
Help with phono stage
Having just purchased a Ap30 which i hope arrives Tuesday I dug out a project phono box to use with it for the mean time. shock horror giant amount of hum when plugged into my current amp, by passing its own phono stage. yes connected the earth etc think its fkd. Question is as my main source is vinyl any ideas for an interim phono stage until I've listened to the amp for a while at not to greater cost?
- Fretless
- Posts: 9325
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1512 times
- Been thanked: 2308 times
Re: Help with phono stage
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- savvypaul
- Posts: 8679
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3002 times
- Contact:
Re: Help with phono stage
Move the phono stage around. See if the hum changes. Hold the phono leads from the turntable between your fingers. Any improvement?
-
- Posts: 351
- Joined: Wed Nov 05, 2014 11:06 pm
- Has thanked: 6 times
- Been thanked: 23 times
Re: Help with phono stage
I bought a phono 2 and had the same Hum problem as Ordinaryman. The Doc advised me to “shuffle the pack” and after rearranging the location of the amp the problem went away. I’ll second Sav’s advice.
-
- Posts: 1687
- Joined: Tue Apr 02, 2019 4:43 pm
- Location: London-ish, or thereabouts
- Has thanked: 622 times
- Been thanked: 2117 times
Re: Help with phono stage
I like MM carts. Currently using a Nagaoka MP500, fantastic.
I’ve tried many many different phono stages, including the Project Phono. It was noisy, didn’t like it.
My favourite of the lot is the humble Schiit Mani. Its fantastic, incredible value for money.
For transparency, never tried an NVA phono stage, but will get one to try at some point in the future.
The Schiit Mani is excellent for MM carts, but not so good for MC. So. I’d look elsewhere if you like MC carts.
I’ve tried many many different phono stages, including the Project Phono. It was noisy, didn’t like it.
My favourite of the lot is the humble Schiit Mani. Its fantastic, incredible value for money.
For transparency, never tried an NVA phono stage, but will get one to try at some point in the future.
The Schiit Mani is excellent for MM carts, but not so good for MC. So. I’d look elsewhere if you like MC carts.
Modded Belles A150 MK2, P90SA, & NVA SSP cables, and LS5.
Leak Stereo 20 & First Audio Classic Copper V2
Modded Lenco GL75 with Saturn arm, heavy custom plinth. Nagaoka MP500.
Nottingham Audio Hyperspace + heavy kit, + Origin Live Conqueror + Koetsu Black
Tom Evans Micro Grove MK2 MC phono
Bluesound Node2i (x2) both with latest power upgrades.
Topping D90MQA and Topping D90SE
Audiolab 6000 CDT transport.
All NVA cables
Leak Stereo 20 & First Audio Classic Copper V2
Modded Lenco GL75 with Saturn arm, heavy custom plinth. Nagaoka MP500.
Nottingham Audio Hyperspace + heavy kit, + Origin Live Conqueror + Koetsu Black
Tom Evans Micro Grove MK2 MC phono
Bluesound Node2i (x2) both with latest power upgrades.
Topping D90MQA and Topping D90SE
Audiolab 6000 CDT transport.
All NVA cables
-
- Posts: 475
- Joined: Tue Apr 16, 2019 4:50 pm
- Has thanked: 100 times
- Been thanked: 77 times
Re: Help with phono stage
Thanks chaps ,moved the phono around and buzz disappeared seems it was too close to turntable/amp . the project phono was purchased as a stop gap when one of my other amps phono section failed and was only used for 2/3weeks and at that time every thing was positioned differently. Also thanks on the heads up on the schitt will probably get one once I've run the little ap30 for a while and see what i think.
- These users thanked the author Ordinaryman for the post:
- savvypaul (Mon Sep 28, 2020 11:15 am)
- Latteman
- Posts: 1223
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 556 times
- Been thanked: 301 times
- Contact:
Re: Help with phono stage
Another vote for the Mani here & used with Nva amps
Analogue Source -
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
- Posts: 766
- Joined: Sat Jul 01, 2017 12:51 pm
- Location: South yorkshire
- Has thanked: 1 time
- Been thanked: 364 times
- Contact:
Re: Help with phono stage
Mofi studiophono is an option
I like mine alot,
I got it on a deal for 240 from superfi, ive run a vm540ml moving magnet and an at33sa through it
I like mine alot,
I got it on a deal for 240 from superfi, ive run a vm540ml moving magnet and an at33sa through it
Last edited by Vinyl-ant on Mon Sep 28, 2020 4:36 pm, edited 1 time in total.
Analogue: oracle delphi sme 309, jbe series 3 cx unipivot dv20x2l, roksan xerxes tabriz vm750, jvc ql-y5f rigb at440, jvc ql-y3f vm750, lenco 75, technics sl150
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
Phono stages: cole lcr, benedict audio hothead
Digital: cyrus cd7, wiim mini x2, topping e30, jds labs el dac 2+
Amplification: nelson pass b1, nelson pass f5
Speakers: 15" fane aperiodic wardrobes
Cans: myryad z40, hifiman sundara + deva, fostex t50rp, sennheiser momentum on ear +over ear, b&w p5 and p7
-
- Posts: 475
- Joined: Tue Apr 16, 2019 4:50 pm
- Has thanked: 100 times
- Been thanked: 77 times
Re: Help with phono stage
Thanks latteman, not a great forum seeker for stuff but from info here and a quick look at some reviews, seems it might be the way to go. Assuming i can buy one. so far they seem to be" out of stock" wherever i have looked. For the moment ill use the project as and when the ap30 arrives. Looking forward to see how it sounds with my cubetts , ssc and ls1. cant wait
-
- Posts: 1687
- Joined: Tue Apr 02, 2019 4:43 pm
- Location: London-ish, or thereabouts
- Has thanked: 622 times
- Been thanked: 2117 times
Re: Help with phono stage
With regards to ordering A Schiit Mani, just order of the USA website. You just have to specify UK 240v plug in the drop down menu.
It will most likely get hit for import tax on the way into the country, but won’t be much, and is still an incredible bargain.
It will most likely get hit for import tax on the way into the country, but won’t be much, and is still an incredible bargain.
Modded Belles A150 MK2, P90SA, & NVA SSP cables, and LS5.
Leak Stereo 20 & First Audio Classic Copper V2
Modded Lenco GL75 with Saturn arm, heavy custom plinth. Nagaoka MP500.
Nottingham Audio Hyperspace + heavy kit, + Origin Live Conqueror + Koetsu Black
Tom Evans Micro Grove MK2 MC phono
Bluesound Node2i (x2) both with latest power upgrades.
Topping D90MQA and Topping D90SE
Audiolab 6000 CDT transport.
All NVA cables
Leak Stereo 20 & First Audio Classic Copper V2
Modded Lenco GL75 with Saturn arm, heavy custom plinth. Nagaoka MP500.
Nottingham Audio Hyperspace + heavy kit, + Origin Live Conqueror + Koetsu Black
Tom Evans Micro Grove MK2 MC phono
Bluesound Node2i (x2) both with latest power upgrades.
Topping D90MQA and Topping D90SE
Audiolab 6000 CDT transport.
All NVA cables