Tinker, Tailor, Streamer, Pi.

All general audio posts go here.
User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

The very observant might have noticed that my signature has changed to include this.

Image

Image


Although the website of the UK distributor Audiostore said it was out of stock this was not the case. Delivery was prompt, but the optical connection lead was missing. This arrived the next day after a phone call to Audiostore. Setting up was simple, directly to the Cisco 2940 via its optical output, streaming with the BubbleUp app as previously. Some adjutments were required, the Eno ethernet filter now feeding into the Cisco 2940 instead of from it and the quality 1m length of DH Labs ethernet cable now connecting the router to the Cisco 2960 instead of the Eno to the streamer.

Running in has taken some time as I have been making the most of the good weather at the tail end of summer. An improvement over the MicroRendu was immediately apparent and after a week was significant. I think the often used term musicality is most appropriate and there is a greater sense of emotion to the music. This is very pronounced on vocals and acoustic instruments, notably the plucking of strings on acoustic guitar. This is appears to be the result of a greater sense of space with guitar solos seemingly leaping out at you. I also detect a greater dynamic range. The extent of the improvement varies according to the quality of the recordings, irrespective of Bit and sample rates. I am delighted with the step up in SQ. A comparison with the ethernet connected silly priced and all in one streaming solutions in bigger boxes with bells and whistles would be very interesting.

The MicroRendu has slotted into the second system powered by the MCRU PS which had been gathering dust. Previously the Topping E30 was directly connected to an old Tesco tablet. A length of Cat 8 ethernet cable removed from the main system connects to the Sky wifi extender, free with Sky Q. As expected the system sounds a lot better. This is partly due to using the DAC setting instead of pre amp as I can control volume from a tablet instead of the remote.
These users thanked the author CN211276 for the post (total 3):
savvypaul (Tue Sep 14, 2021 2:14 pm) • Fretless (Tue Sep 14, 2021 2:34 pm) • slinger (Tue Sep 14, 2021 2:52 pm)
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

User avatar
slinger
Posts: 9233
Joined: Wed Aug 22, 2012 4:30 pm
Location: The Garden of England
Has thanked: 4567 times
Been thanked: 3118 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by slinger »

That's a much more attractive table cloth.

What?

:lol:
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

slinger wrote: Tue Sep 14, 2021 2:52 pm That's a much more attractive table cloth.

What?

:lol:
Seem to recall my wife buying it at the market in Marrakesh. Think she had to haggle. :lol:
These users thanked the author CN211276 for the post:
slinger (Tue Sep 14, 2021 6:09 pm)
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

antonio66
Posts: 1006
Joined: Mon Jul 29, 2019 8:16 am
Location: Grimsby/Phnom Penh
Has thanked: 1449 times
Been thanked: 408 times
Great Britain

Re: Tinker, Tailor, Streamer, Pi.

Unread post by antonio66 »

You will have to clarify a couple of things for me CN.

What else is going through Cisco 2960 apart from your hifi stream?

What else is going through your Cisco 2940 apart from your hifi stream?

These two switches are connected? - 2960 to Sonore Optical using ethernet cable, then optical cable to the Cisco 2940?

I may have more questions later :geek: :lol:

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

It is a bit complicated. Gone are the days when it was just a TT/CDP, amp and speakers. :lol:

The sky router is connected to the Cisco 2960 by a short length of ethernet cable. The router is directly connected to the Sky Q box by an ethernet cable. This is because, for some reason, a connection to the Sky Q box from the switch caused problems with the connection to the streamer.

The Cisco 2960 connects to the hifi and desk top PC by long lengths of ethernet cable. The hifi connection is to the Network Acoustics ethernet filter which connects by a short length of cable to one of the ethernet ports on the Cisco 2940.



The Cisco 240 has a seperate port with a removable device fitted in which accepts optical. This connects via an optical cable to a similar removable device which came with the optical rendu (you can see in one of the picturess) completing the connection.

Confused :lol: and there is more between the streamer and pre amp. :lol:
These users thanked the author CN211276 for the post:
antonio66 (Wed Sep 15, 2021 11:03 pm)
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

I forgot, the NAS is also directly connected to thevCisco 2960 via a short length of ethernet cable. :lol: I found tha I could still play my ripped CDs during an internet outage a few months ago.
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

User avatar
slinger
Posts: 9233
Joined: Wed Aug 22, 2012 4:30 pm
Location: The Garden of England
Has thanked: 4567 times
Been thanked: 3118 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by slinger »

Image
Image
These users thanked the author slinger for the post (total 2):
Latteman (Wed Sep 15, 2021 5:01 pm) • Fretless (Wed Sep 15, 2021 6:28 pm)
Amps - NVA P50, AP30, A40, Stanislav Palo Tube Headphone Amp BB 85
Speakers - Monitor Audio Silver RX2
Cables - NVA LS1+LS3, SSC, Gotham S/PDIF, IBRA Optical
Digital - NAD C516BEE, SONY ST-SDB900 DAB TUNER, TEAC UD-H01 DAC
Analogue - Pro-Ject Debut Carbon Esprit SB, Graham Slee Gram Amp 2 Phono
Cans - Grado SR80, ATH-M50X

antonio66
Posts: 1006
Joined: Mon Jul 29, 2019 8:16 am
Location: Grimsby/Phnom Penh
Has thanked: 1449 times
Been thanked: 408 times
Great Britain

Re: Tinker, Tailor, Streamer, Pi.

Unread post by antonio66 »

CN211276 wrote: Wed Sep 15, 2021 7:56 am It is a bit complicated. Gone are the days when it was just a TT/CDP, amp and speakers. :lol:

The sky router is connected to the Cisco 2960 by a short length of ethernet cable. The router is directly connected to the Sky Q box by an ethernet cable. This is because, for some reason, a connection to the Sky Q box from the switch caused problems with the connection to the streamer.

The Cisco 2960 connects to the hifi and desk top PC by long lengths of ethernet cable. The hifi connection is to the Network Acoustics ethernet filter which connects by a short length of cable to one of the ethernet ports on the Cisco 2940.



The Cisco 240 has a seperate port with a removable device fitted in which accepts optical. This connects via an optical cable to a similar removable device which came with the optical rendu (you can see in one of the picturess) completing the connection.

Confused :lol: and there is more between the streamer and pre amp. :lol:
Thank you for the explanation, the 2940 I can understand splits the signal between hifi and home pc, what I cannot understand is why don't you go direct from the 2940 to to your streamer with ethernet cable , negating the use of the 2960 and your new device?

antonio66
Posts: 1006
Joined: Mon Jul 29, 2019 8:16 am
Location: Grimsby/Phnom Penh
Has thanked: 1449 times
Been thanked: 408 times
Great Britain

Re: Tinker, Tailor, Streamer, Pi.

Unread post by antonio66 »

Just giving a little more thought, the 2940 and 2960 can both split the signal?, if that is the case and you wanted to change from ethernet to optical, why not just use the 2960 and your new purchase, removing the 2940 from the system?

User avatar
CN211276
Posts: 6522
Joined: Tue Aug 09, 2016 9:29 am
Location: Cardiff
Has thanked: 1401 times
Been thanked: 976 times
EUROPEAN_UNION

Re: Tinker, Tailor, Streamer, Pi.

Unread post by CN211276 »

Not sure if I follow you. I bought the 2960 a year before the 2940. I had read reports of two switches being better than one and found out that this was the case. The addition of the second switch brough about a bigger leap in SQ than the introduction of the first. The OpticalRendu can only be connected to an optical cable connected to a similar port on a switch or the Sonore module. The module is expensive and requires a power supply. The switch performs the same function and cost me £24. :grin:
Main System
NVA BMU, P90SA/A80s (latest spec), Cube 1s, TIS, TISC(LS7)
Sonore OpticalRendu, Chord Mscaler & Qutest, Sbooster PSs
Network Acoustics Eno, ifi iPurifier3, AQ JB FMJ, Cisco 2940 & 2960
DH Labs ethernet, BNC & USB cables, Farnells cat 8 ethernet cable

Second System
NVA P20/ A20, Cubettes, LS3, SSP, SC
Sonore MicroRendu, Chord Mojo 2 MCRU PSs, AQ Carbon USB cable & JB FMJ

Headphones
Grado SR325e/Chord Mojo, Beyerdynamic Avetho/AQ DF Colbat

RIP Doc

Post Reply