Looking for some advice about a pair of vintage NVA monoblocks. They look like they are from the 80's with old style aluminium case and original boards. But they have 300va IPL transformers ( 30-0-30V ) and therefore a high spec A70 ( usually 160va I think ) but with only have 2 smoothing caps.
Any suggestions as to how to upgrade them ?
Golden Oldies
- Fretless
- Posts: 9327
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1512 times
- Been thanked: 2308 times
Re: Golden Oldies
From the heat sinks I would say they were 1990's production model.
Best to wait for Ithilstone (Tomasz) for technical advice on refurb/upgrade.
Best to wait for Ithilstone (Tomasz) for technical advice on refurb/upgrade.
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
- savvypaul
- Posts: 8682
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1664 times
- Been thanked: 3003 times
- Contact:
-
- Posts: 1010
- Joined: Thu Jul 04, 2019 1:06 pm
- Location: Industrial waste lands of the north west
- Has thanked: 559 times
- Been thanked: 488 times
Re: Golden Oldies
Ah I wondered if they would turn up on here. If they are the eBay ones I was the under bidder
Modified Airlink BPS 3110S with LDA DC filter
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables
- Ithilstone
- Posts: 570
- Joined: Mon Jun 01, 2015 10:54 am
- Has thanked: 73 times
- Been thanked: 61 times
Re: Golden Oldies
Those look like very early 90s - original parts and nicely cleaned.
If it is working and showing correct voltages I would not attempted any "upgrades".
If it is working and showing correct voltages I would not attempted any "upgrades".
Nothing to see here...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
Re: Golden Oldies
Yes they are running very sweetly indeed Tom ( if anything a little 'softer' than current models but still very much NVA ). I have not checked the voltages yet. Should they be around 42/3 V DC ?
And sorry about my ebay bid ! It was a bit of a blind bid given the poor pictures but turned out ok in the end.
And sorry about my ebay bid ! It was a bit of a blind bid given the poor pictures but turned out ok in the end.
-
- Posts: 1010
- Joined: Thu Jul 04, 2019 1:06 pm
- Location: Industrial waste lands of the north west
- Has thanked: 559 times
- Been thanked: 488 times
Re: Golden Oldies
I tried asking the seller a few questions and he seemed clueless, you did well and I am a tad envious
Modified Airlink BPS 3110S with LDA DC filter
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables
Re: Golden Oldies
Yes the buyer had them listed originally as A40's but the cases looked bigger.
I may change the RS 4700uf caps ( now pushing 30 years old ) to SuperTech slit-foil ones recommended by Steve in his DIY build. Looks like a straight replacement and that's about the limit of my very basic soldering skills. The ILP transformer was very well spoken off by Richard but I think they closed down in 2000's.
Potentially you could put in another transformer and caps to bring it up to A80 spec as there could be enough room in the case. But this is way way beyond my limits.
I may change the RS 4700uf caps ( now pushing 30 years old ) to SuperTech slit-foil ones recommended by Steve in his DIY build. Looks like a straight replacement and that's about the limit of my very basic soldering skills. The ILP transformer was very well spoken off by Richard but I think they closed down in 2000's.
Potentially you could put in another transformer and caps to bring it up to A80 spec as there could be enough room in the case. But this is way way beyond my limits.