Cartridge for Doc's G99/Neat

All general audio posts go here.
User avatar
scotty38
Posts: 301
Joined: Sat Jan 20, 2018 12:51 am
Has thanked: 9 times
Been thanked: 4 times
Kiribati

Cartridge for Doc's G99/Neat

Unread post by scotty38 »

A little premature but hey ho it's good to think about these things...

You may have seen that I'm buying Doc's G99 minus headshell/cartridge and I know he used a Gold SPU on it so I am pretty much set on just going out and buying a current SPU for it. However, the only real basis for that is I know it'll fit and I think they look great.

Any advice or thoughts please?

User avatar
scotty38
Posts: 301
Joined: Sat Jan 20, 2018 12:51 am
Has thanked: 9 times
Been thanked: 4 times
Kiribati

Re: Cartridge for Doc's G99/Neat

Unread post by scotty38 »

Oh and by the way I was thinking of aiming a bit lower down the SPU tree :-)

User avatar
savvypaul
Posts: 8665
Joined: Tue Oct 11, 2016 7:14 pm
Location: Durham
Has thanked: 1662 times
Been thanked: 2991 times
Contact:
Great Britain

Re: Cartridge for Doc's G99/Neat

Unread post by savvypaul »

Denon 103 in a suitable headshell

https://www.ebay.co.uk/itm/Audio-Techni ... SwRTtbUGco

Dave Cawley, who is a member here, usually has best prices on Denon carts and next day delivery
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/

Daniel Quinn
Posts: 8586
Joined: Thu Jul 12, 2012 7:16 am
Has thanked: 24 times
Been thanked: 399 times

Re: Cartridge for Doc's G99/Neat

Unread post by Daniel Quinn »

Denon deosnt grow on the spu tree which he said he was looking at.

User avatar
savvypaul
Posts: 8665
Joined: Tue Oct 11, 2016 7:14 pm
Location: Durham
Has thanked: 1662 times
Been thanked: 2991 times
Contact:
Great Britain

Re: Cartridge for Doc's G99/Neat

Unread post by savvypaul »

Daniel Quinn wrote: Mon Aug 19, 2019 10:27 am Denon deosnt grow on the spu tree which he said he was looking at.
The entry range SPU is around £600 iirc.

The Denon is not an SPU but it has some similarities - low compliance (which would suit the NEAT arm) and a similarly full flavoured sound. Not as refined as the SPU but good fun.

Vinyl-Ant would be a good guy to ask regarding cartridges for that arm...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/

User avatar
scotty38
Posts: 301
Joined: Sat Jan 20, 2018 12:51 am
Has thanked: 9 times
Been thanked: 4 times
Kiribati

Re: Cartridge for Doc's G99/Neat

Unread post by scotty38 »

Thanks both much appreciated. As it happens the entry level SPU 1S is £425, SPU 1E £465 on Analogue Seduction, not looked anywhere else yet

User avatar
wiicrackpot
Posts: 795
Joined: Fri Oct 04, 2013 7:49 pm
Location: Glasgow
Has thanked: 0
Been thanked: 0

Re: Cartridge for Doc's G99/Neat

Unread post by wiicrackpot »

Scotty, you have PM.
Frank...made me do it.

_D_S_J_R_
Posts: 4185
Joined: Mon Feb 03, 2014 9:53 am
Location: The end of the road in Suffolk Coastal.
Has thanked: 10 times
Been thanked: 6 times
Wales

Re: Cartridge for Doc's G99/Neat

Unread post by _D_S_J_R_ »

You lot don't like your high frequencies do you? :D

I'd sooner look to Hana or AT MC's myself as the Neat arm has no bias correction amongst other things. An AT-F7 should be ample for this particular deck and tonearm, which I got to know quite well after the initial build and I tried several different cartridges in it. RD played with a Grado Black One for a while ant in his listening area, I didn't find it hugely lacking compared to the SPU particularly. Grado's like 1.6g tracking and in the past, very little bias correction too.
Hanging on in quiet desperation is the English way...The time has gone, The song is over, Thought I'd something more to say...

User avatar
scotty38
Posts: 301
Joined: Sat Jan 20, 2018 12:51 am
Has thanked: 9 times
Been thanked: 4 times
Kiribati

Re: Cartridge for Doc's G99/Neat

Unread post by scotty38 »

wiicrackpot wrote: Mon Aug 19, 2019 11:23 am Scotty, you have PM.
Thanks but can't see one :-)

User avatar
wiicrackpot
Posts: 795
Joined: Fri Oct 04, 2013 7:49 pm
Location: Glasgow
Has thanked: 0
Been thanked: 0

Re: Cartridge for Doc's G99/Neat

Unread post by wiicrackpot »

Don't know what happened to original, an up to date version retyped, don't know what i wrote originally.
Frank...made me do it.

Post Reply