The Cubix pro stacks will go this coming weekend.
To replace them I am going to build a unpowered set to see the difference the internal amps make. So customers can have the two options.
I am building a pair of Cube 1 next though for a customer.
I have the old set of B&W cabs I was going to do to prove to everyone who wants to listen here the efficacy of Doc Mods, they will follow the Cube 1s being built.
I have on order Cube 2 and the new Cube 3 cabs, but I wont build them up until needed.
Next speaker fun for me.
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
- zebbo
- Posts: 1741
- Joined: Thu Jul 12, 2012 8:22 am
- Location: As close to France as you can get.
- Has thanked: 7 times
- Been thanked: 28 times
Re: Next speaker fun for me.
VERY interesting!
The unpowered version would be my only real option so will watch with interest.
The unpowered version would be my only real option so will watch with interest.
Audio Grail "Sable" Garrard 401 with Cumbrian Green Slate plinth / Audiomods 6 / Benz Micro Gullwing SLR, Phono 2, NVA INT400sa. (Oh and a Copland CDA823 CD Player, for when I fancy a bit of the devil's spawn!)
-
- Posts: 4185
- Joined: Mon Feb 03, 2014 9:53 am
- Location: The end of the road in Suffolk Coastal.
- Has thanked: 10 times
- Been thanked: 6 times
Re: Next speaker fun for me.
Would be interesting to hear the B&W cabs. Do the original drivers lend themselves to Doc mods or aren't they as good as the ones you have?
P.S. I've seen the mass-loaded cabs and they're VERY heavy!!!
P.S. I've seen the mass-loaded cabs and they're VERY heavy!!!
Hanging on in quiet desperation is the English way...The time has gone, The song is over, Thought I'd something more to say...
- Fretless
- Posts: 9327
- Joined: Wed Nov 12, 2014 12:15 pm
- Location: Somewhere in Holland
- Has thanked: 1513 times
- Been thanked: 2308 times
Re: Next speaker fun for me.
New Cube 3 ???????
Upstairs:
VinylPro-Ject 1.2 + Grado Sig Jr + Cambridge Alva Duo
DigiVolumio PC + Kiss DP-500 + Sabaj A20d
NVA: Cube2 - SSP - LS6+ Sabaj A10a {x2)
Little Bear MC2 + AQ NightHawk
Downstairs:
VinylLogic DM101 + Syrinx LE1 + Grado Sig MCX
DigiDenafrips Ares II + Volumio PC + Cambridge CXC
NVA: P50 & PSU - BMUAiyima A07 MAX + Arcam One
HP: Allo DigiOne + Sabaj A10d + AQ NightOwl
Office: Allo DigiOne SIG + SMSL M300se + Douk G4 (x2)
Mission 760 + Monolith 887 + German Maestro GMP 450
-
- Posts: 4185
- Joined: Mon Feb 03, 2014 9:53 am
- Location: The end of the road in Suffolk Coastal.
- Has thanked: 10 times
- Been thanked: 6 times
Re: Next speaker fun for me.
The drivers are waiting
Hanging on in quiet desperation is the English way...The time has gone, The song is over, Thought I'd something more to say...
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Next speaker fun for me.
I bought them as an empty set of cabinets on ebay for about £30, so they will be all Doc Mods, drivers, steel plate, no crossover etc._D_S_J_R_ wrote:Would be interesting to hear the B&W cabs. Do the original drivers lend themselves to Doc mods or aren't they as good as the ones you have?
P.S. I've seen the mass-loaded cabs and they're VERY heavy!!!
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Next speaker fun for me.
I sent you an email, no reply, as I forgot what you measured for the driver hole on your old Cube 3 can you confirm again.Fretless wrote:New Cube 3 ???????