I’ve not ‘opened’ a speaker cable but was wondering how difficult it would be to set my ls6 to biwire- split in the cabinet to feed the mid bass & tweeter- is the cable split obvious?
Currently ls6 is direct to the mid bass then a short Ls2 feed to the tweeter
Cheers
Ls6 biwire
-
Latteman
- Posts: 1222
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 555 times
- Been thanked: 299 times
- Contact:
Ls6 biwire
Analogue Source -
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
karatestu
- Posts: 5964
- Joined: Sun Jan 08, 2017 4:40 pm
- Location: North Yorkshire
- Has thanked: 1876 times
- Been thanked: 1398 times
Re: Ls6 biwire
I think Tomasz is the man to ask. LS6 is a bit expensive to be playing about with don't you think ?
DIY FREE ZONE
-
savvypaul
- Posts: 8667
- Joined: Tue Oct 11, 2016 7:14 pm
- Location: Durham
- Has thanked: 1662 times
- Been thanked: 2991 times
- Contact:
-
Latteman
- Posts: 1222
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 555 times
- Been thanked: 299 times
- Contact:
Re: Ls6 biwire
Cheers Paul
Analogue Source -
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
Ithilstone
- Posts: 570
- Joined: Mon Jun 01, 2015 10:54 am
- Has thanked: 73 times
- Been thanked: 61 times
Re: Ls6 biwire
It is a fairly straight forward but labour intensive job - you have 20 thicker and 28 fine very thin solid core cables in each run -there is no way of untwisting the solder end (I tried) so it has to be cut and then stripped again - be very very careful with thin ones as they brake easily - any questions - PM me
Nothing to see here...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
-
Latteman
- Posts: 1222
- Joined: Tue Aug 14, 2018 7:20 pm
- Location: S. Yorkshire
- Has thanked: 555 times
- Been thanked: 299 times
- Contact:
Re: Ls6 biwire
Thank you for the reply- does sound tricky
Analogue Source -
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
Denon DP47f; AT-VM95SH
GL-59; ARB uni pivot; AT- Signet
Ifi Zen Phono
Doug Self balanced Pre amp
Akai 4000DS mk2 R2R
Digital Sources- Argon Pi4 v2; IfI iUSB 3.0, Ifi Neo idsd Dac;
Tidal / Radio Paradise
Amplification Nva 300va mono blocks
Speakers Lii Audio F-15 in Open Baffle; Ls6
Weiduka AC8.8- for digital sources
Mini BMU for analog sources
-
NSNO2021
- Posts: 1008
- Joined: Thu Jul 04, 2019 1:06 pm
- Location: Industrial waste lands of the north west
- Has thanked: 559 times
- Been thanked: 487 times
Re: Ls6 biwire
I found it relatively easy to tri-wire my LS6/Cubix combo and I am a novice In fact it's encouraged me enough to plan in the new year to split apart the thin and thick wires and sleeve them in PTFE and then put both sections inside a shielded outer. Happy to answer any questions you have Thanks Paul
Modified Airlink BPS 3110S with LDA DC filter
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables
TTs, Kenwood KD 8030 with AT OC9XSH, Opera Consonance Wax Engine mk2 with modified Apheta 2 MC cart, PT TOO awaiting restoration.
LDA MCJ3 phono,Schiit Freya plus pre amp, NAD M23, Audiolab 9000 CD transport, Denafrips Pontus 2 DAC, Mano Ultra2 streamer, Cisco switch, Audio Technica ATH 70 cans, Serhan Swift Mu2 mk2 speakers & NSNO W48.5 speaker cables
-
Ithilstone
- Posts: 570
- Joined: Mon Jun 01, 2015 10:54 am
- Has thanked: 73 times
- Been thanked: 61 times
Re: Ls6 biwire
It is not tricky at all it just take a bit more time than it looks like from "outside"
I am sure you stripped enough very thin wires (tone arm thin) that you will not have a problem - just reserve yourself a good couple of hours
I am sure you stripped enough very thin wires (tone arm thin) that you will not have a problem - just reserve yourself a good couple of hours
Nothing to see here...
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/
I am in the hi-fi trade
Status: Manufacturer
Company Name: NVA Hi-Fi
https://nvahifi.co.uk/