Sony PS-X7
- terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times
Sony PS-X7
I appear to have become possessed by collectomania. I now have a Sony PS-X7 turntable. But it only seems to play the right channel. I've tried two carts, so I think the problem must be in the cabling. The external cables don't have a great quality feel to them: the RCAs are corroded and loose, but it may also be the arm cabling.
The one channel seems to show promise, so it may be worth an effort. But how to procede?
Advice and opinions please.
The one channel seems to show promise, so it may be worth an effort. But how to procede?
Advice and opinions please.
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Sony PS-X7
You need a multimeter, set to ohms or continuity, take the base off the turntable disconnect arm leads (probably a tag strip) and check continuity to headshell leads, then check continuity other way to plugs - repair as needed.
- terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times
Re: Sony PS-X7
OK. Multimeter I have. Vinyl Engine can provide some info which will help I think.
The leads from the turntable don't look triffic, I'm wondering whether I should be thinking of replacing them with something like soundcord?
Have you heard this TT? Worth the effort or should I cut my losses?
The leads from the turntable don't look triffic, I'm wondering whether I should be thinking of replacing them with something like soundcord?
Have you heard this TT? Worth the effort or should I cut my losses?
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Sony PS-X7
Not heard it, if it is direct drive and weighs a lot it will be good, if belt drive it will warble and if DD but light and plasticy it will be crap. SC makes good TT leads.
- terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times
Re: Sony PS-X7
Direct drive and similar in weight to the PL71. So the basic turntable seems to fit the bill. Carbon fibre tone arm and automatic operation totally new to me.
http://www.thevintageknob.org/sony-PS-X7.html
I think my first step will be to replace the RCA plugs and check lubrication.
http://www.thevintageknob.org/sony-PS-X7.html
I think my first step will be to replace the RCA plugs and check lubrication.
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Sony PS-X7
Vintage knob says the arm is the weak link but apart from that the turntable excellent - looks like you got a bargain.
- terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times
Re: Sony PS-X7
We'll see. I've found the problem - a broken connection in the RCA socket.
The RCAs are 'tin' and corroded. So I think it sensible to replace them. What's a decent replacement - Neutrik? Gold? or will Nickel do?
The RCAs are 'tin' and corroded. So I think it sensible to replace them. What's a decent replacement - Neutrik? Gold? or will Nickel do?
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Sony PS-X7
You can spend really silly money on phono plugs if you want to - I don't want to
Gold doesn't tarnish so is always a good idea in the long run but it is plug construction, quality of dielectric (which no one seems to mention) that is more important.
Best price is go to a proper distributor, not a hi-fi rip-off merchant - Farnell is a good choice - this link will give you an idea of the choice available to you http://uk.farnell.com/jsp/search/browse ... 1%2B215345
Gold doesn't tarnish so is always a good idea in the long run but it is plug construction, quality of dielectric (which no one seems to mention) that is more important.
Best price is go to a proper distributor, not a hi-fi rip-off merchant - Farnell is a good choice - this link will give you an idea of the choice available to you http://uk.farnell.com/jsp/search/browse ... 1%2B215345
- terrybooth
- Posts: 4397
- Joined: Wed Jul 11, 2012 6:49 pm
- Location: West Yorkshire
- Has thanked: 499 times
- Been thanked: 250 times
Re: Sony PS-X7
If I wanted to pay through the nose for RCA plugs, I know where to go and it isn't very far from where I am. :DDr Bunsen Honeydew wrote:You can spend really silly money on phono plugs if you want to - I don't want to
Gold doesn't tarnish so is always a good idea in the long run but it is plug construction, quality of dielectric (which no one seems to mention) that is more important.
Best price is go to a proper distributor, not a hi-fi rip-off merchant - Farnell is a good choice - this link will give you an idea of the choice available to you http://uk.farnell.com/jsp/search/browse ... 1%2B215345
But, back in the real world - I'm assuming that the metal in most (if not all) of these is brass, with some sort of plating but the dielectric bit? What are the choices? And, when it comes to assembly (stripping back wire, using or not using the physical clamp, soldering) are there better and worse things to do (leave aside soldering - that's a subject in itself)?
Pioneer PL71/DL103/ Phono2/HiFiPi/P90SA/TIS/CubixPro
- Dr Bunsen Honeydew
- Posts: 30758
- Joined: Wed Jul 11, 2012 7:26 pm
- Location: Muppet Labs
- Has thanked: 0
- Been thanked: 48 times
Re: Sony PS-X7
Air is the best dielectric, and that is free
So polymer foams are best but easier to damage. I really should have mentioned it, just pay the money you want to and get plugs. We are working at audio frequencies so no where near as import at RF. Just jump in and don't worry - go for the one you like the look and price of.
So polymer foams are best but easier to damage. I really should have mentioned it, just pay the money you want to and get plugs. We are working at audio frequencies so no where near as import at RF. Just jump in and don't worry - go for the one you like the look and price of.